{
    //
    //  - Official SOGo document: http://sogo.nu/support/index.html#/documentation
    //  - Mailing list: http://sogo.nu/support/index.html#/community
    //

    // Daemon address and port
    WOPort = PH_SOGO_BIND_ADDRESS:PH_SOGO_BIND_PORT;

    // PID file
    //WOPidFile = PH_SOGO_PID_FILE;

    // Log file
    //WOLogFile = PH_SOGO_LOG_FILE;

    // Enable verbose logging. Reference:
    // http://www.sogo.nu/nc/support/faq/article/how-to-enable-more-verbose-logging-in-sogo.html
    //SOGoDebugRequests = YES;
    //SOGoEASDebugEnabled = YES;
    //ImapDebugEnabled = YES;
    //LDAPDebugEnabled = YES;
    //MySQL4DebugEnabled = YES;
    //PGDebugEnabled = YES;

    // Define the URL to online help for SOGo. When set, an additional icon
    // will appear near the logout button in SOGo's web interface. The URL
    // will always be open in a blank target.
    //SOGoHelpURL = '';

    // set the maximum allowed size for content being sent to SOGo, this can
    // also limit the file attachment size being uploaded to SOGo when
    // composing a mail.
    // The value is in kilobyte. Default is 0 or disabled (unlimit).
    WOMaxUploadSize = PH_MESSAGE_SIZE_LIMIT_KB;

    // Parameter used to set the maximum allowed email message size when
    // composing a mail.
    // The value is in kilobytes. By default, the value is 0, or disabled so
    // no limit will be set.
    SOGoMaximumMessageSizeLimit = PH_MESSAGE_SIZE_LIMIT_KB;

    // Performance Tuning
    //
    // The amount of instances of SOGo that will be spawned to handle multiple
    // requests simultaneously. When started from the init script, that amount
    // is overriden by the `PREFORK=` setting in /etc/sysconfig/sogo or
    // /etc/default/sogo. A value of 3 is a reasonable default for low usage.
    // The maximum value depends on the CPU and IO power provided by your
    // machine: a value set too high will actually decrease performances under
    // high load.
    //
    // You should have at least one child per EAS device configured to use
    // "push". You must also have more children than you have EAS devices
    // configured to use "push" - in order to handle normal SOGo requests to
    // its Web or DAV interfaces.
    //
    // Defaults to 1 when unset, increase it if you see below error message in
    // sogo log file: 'No child available to handle incoming request'
    //
    // WARNING:
    //      - on RHEL/CentOS, this setting is controlled by parameter
    //        'PREFORK=' defined in /etc/sysconfig/sogo.
    //      - on Debian/Ubuntu, this setting is controlled by parameter
    //        'PREFORK=' defined in /etc/default/sogo.
    WOWorkersCount = 10;

    // Parameter used to set the maximum amount of time, in seconds, SOGo will
    // wait before replying to a Ping command.
    // If not set, it defaults to 10 seconds.
    SOGoMaximumPingInterval = PH_SOGO_PROXY_TIMEOUT;

    // Parameter used to set the maximum amount of time, in seconds, SOGo will
    // wait before replying to a Sync command.
    // If not set, it defaults to 30 seconds.
    SOGoMaximumSyncInterval = PH_SOGO_PROXY_TIMEOUT;

    // Parameter used to set the maximum amount of time, in seconds, SOGo will
    // wait before doing an internal check for data changes (add, delete, and
    // update). This parameter must be lower than SOGoMaximumSyncInterval and
    // SOGoMaximumPingInterval.
    // If not set, it defaults to 10 seconds.
    SOGoInternalSyncInterval = 30;

    // Specifies the number of minutes after which a busy child process will be
    // killed by the parent process.
    // Defaults to 10 (minutes).
    WOWatchDogRequestTimeout = PH_SOGO_WATCHDOG_REQUEST_TIMEOUT;

    // Overwrite the maximum number of items returned during a Sync operation.
    // Defaults to 0, which means no overwrite is performed.
    // Setting this parameter to a value greater than 512 will have unexpected
    // behaviour with various ActiveSync clients.
    //SOGoMaximumSyncWindowSize = 100;

    // Overwrite the maximum response size during a Sync operation.
    // The value is in kilobytes. Setting this to 512 means the response size
    // will be of 524288 bytes or less (or a bit greater if needed for syncing
    // one item). Note that if you set the value too low and a mail message
    // (or any other object like calendar events, tasks and contacts) surpasses
    // it, it will still be synced but only this item will be.
    // Defaults to 0, which means no overwrite is performed.
    //
    // Say you have these five mails and you set the limit to 512KB:
    //  1.  250 KB
    //  2.  250 KB
    //  3.   25 KB
    //  4.  750 KB
    //  5.   10 KB
    // Sync iteration no. 1 will pick message 1, 2 and 3.
    // Sync iteration no. 2 will pick message 4.
    // Sync iteration no. 3 will pick message 5.
    SOGoMaximumSyncResponseSize = 2048;

    // The maximum amount of memory (in megabytes) that a child can use.
    // Reaching that value will force children processes to restart, in order
    // to preserve system memory.
    //
    // Error message when it reaches the value:
    // "terminating app, vMem size limit (xxx MB) has been reached (currently xxx MB)"
    //
    // Defaults to 384.
    SxVMemLimit = 500;

    // Enable XSRF (also known as CSRF) protection.
    SOGoXSRFValidationEnabled = YES;

    // IMAP connection pool.
    // Your performance will slightly increase, as you won't open a new
    // connection for every access to your IMAP server.
    // But you will get a lot of simultaneous open connections to your IMAP
    // server, so make sure he can handle them.
    // For debugging it is reasonable to turn pooling off.
    NGImap4DisableIMAP4Pooling = NO;

    SOGoProfileURL = "PH_SOGO_DB_TYPE://PH_SOGO_DB_USER:PH_SOGO_DB_PASSWD@PH_SQL_SERVER_ADDRESS:PH_SQL_SERVER_PORT/PH_SOGO_DB_NAME/PH_SOGO_DB_TABLE_USER_PROFILE";
    OCSFolderInfoURL = "PH_SOGO_DB_TYPE://PH_SOGO_DB_USER:PH_SOGO_DB_PASSWD@PH_SQL_SERVER_ADDRESS:PH_SQL_SERVER_PORT/PH_SOGO_DB_NAME/PH_SOGO_DB_TABLE_FOLDER_INFO";
    OCSSessionsFolderURL = "PH_SOGO_DB_TYPE://PH_SOGO_DB_USER:PH_SOGO_DB_PASSWD@PH_SQL_SERVER_ADDRESS:PH_SQL_SERVER_PORT/PH_SOGO_DB_NAME/PH_SOGO_DB_TABLE_SESSIONS_FOLDER";
    OCSEMailAlarmsFolderURL = "PH_SOGO_DB_TYPE://PH_SOGO_DB_USER:PH_SOGO_DB_PASSWD@PH_SQL_SERVER_ADDRESS:PH_SQL_SERVER_PORT/PH_SOGO_DB_NAME/PH_SOGO_DB_TABLE_ALARMS";

    // With 3 parameters below, SOGo requires only 9 SQL tables in total
    // instead of creating 4 SQL tables for each user.
    OCSCacheFolderURL = "PH_SOGO_DB_TYPE://PH_SOGO_DB_USER:PH_SOGO_DB_PASSWD@PH_SQL_SERVER_ADDRESS:PH_SQL_SERVER_PORT/PH_SOGO_DB_NAME/PH_SOGO_DB_TABLE_CACHE_FOLDER";
    OCSStoreURL = "PH_SOGO_DB_TYPE://PH_SOGO_DB_USER:PH_SOGO_DB_PASSWD@PH_SQL_SERVER_ADDRESS:PH_SQL_SERVER_PORT/PH_SOGO_DB_NAME/PH_SOGO_DB_TABLE_STORE";
    OCSAclURL = "PH_SOGO_DB_TYPE://PH_SOGO_DB_USER:PH_SOGO_DB_PASSWD@PH_SQL_SERVER_ADDRESS:PH_SQL_SERVER_PORT/PH_SOGO_DB_NAME/PH_SOGO_DB_TABLE_ACL";

    // Default language in the web interface
    SOGoLanguage = English;

    // Specify which module to show after login: Calendar, Mail, Contacts.
    SOGoLoginModule = Mail;

    // Must login with full email address
    SOGoForceExternalLoginWithEmail = YES;

    // Allow user to change full name and email address.
    SOGoMailCustomFromEnabled = NO;

    // IMAP server
    // Local connection is considered as secure by Dovecot, so 'imap://' is fine.
    // With remote IMAP server, use 'imaps://PH_IMAP_SERVER:143/?tls=YES' instead;
    SOGoIMAPServer = "imap://PH_IMAP_SERVER:143/?tls=YES&tlsVerifyMode=allowInsecureLocalhost";

    // Allow user to add other IMAP accounts that will be visible from the SOGo
    // Webmail interface.
    // Default is NO.
    //SOGoMailAuxiliaryUserAccountsEnabled = YES;

    // SMTP server
    SOGoSMTPServer = "smtp://PH_SMTP_SERVER:587/?tls=YES&tlsVerifyMode=allowInsecureLocalhost";
    SOGoMailingMechanism = smtp;
    SOGoSMTPAuthenticationType = PLAIN;

    // Enable managesieve service
    //
    // WARNING: Sieve scripts generated by SOGo is not compatible with Roundcube
    //          webmail, don't use sieve service in both webmails, otherwise
    //          it will be messy.
    //          FYI: https://docs.iredmail.org/why.no.sieve.support.in.sogo.html
    //
    //SOGoSieveServer = "sieve://PH_MANAGESIEVE_SERVER:PH_MANAGESIEVE_PORT/?tls=YES&tlsVerifyMode=allowInsecureLocalhost";
    //SOGoSieveScriptsEnabled = YES;
    //SOGoVacationEnabled = YES;
    //SOGoForwardEnabled = YES;
    SOGoSieveFolderEncoding = UTF-8;

    // Memcached
    SOGoMemcachedHost = PH_MEMCACHED_BIND_ADDRESS;

    // Parameter used to set which usernames require administrative privileges
    // over all the users tables. For example, this could be used to post
    // events in the users calendar without requiring the user to configure
    // his/her ACLs. In this case you will need to specify those superuser's
    // usernames like this :
    // SOGoSuperUsernames = (<username1>[,<username2>, ...]);
    //SOGoSuperUsernames = ();

    SOGoTimeZone = "America/New_York";

    SOGoFirstDayOfWeek = 1;

    SOGoRefreshViewCheck = every_5_minutes;
    SOGoMailReplyPlacement = below;

    // Disable gravatar
    SOGoExternalAvatarsEnabled = NO;
    SOGoGravatarEnabled = NO;

    // Control WebDAV access to the Calendar / Contacts collections.
    // This can be used to deny access to these resources from Thunderbird
    // Lightning for example.
    // Defaults to YES when unset.
    //SOGoCalendarDAVAccessEnabled = NO;
    //SOGoAddressBookDAVAccessEnabled = NO;

    // Allow users to share publicly (ie., requiring not authentication) their
    // calendars and address books.
    // Defaults to NO when unset.
    //SOGoEnablePublicAccess = YES;

    //
    // Notifications
    //
    // Enable email-based alarms on events and tasks.
    SOGoEnableEMailAlarms = YES;

    // Notify meeting participants
    SOGoAppointmentSendEMailNotifications = YES;

    // Notify if a calendar or an address book has been created.
    SOGoFoldersSendEMailNotifications = NO;

    // Notify involved users of a calendar or address book's ACLs.
    SOGoACLsSendEMailNotifications = YES;

    // Notify when a modification is being done to his/her own calendar by someone else.
    SOGoNotifyOnExternalModifications = YES;

    // NOTE: PostgreSQL cannot update view in iRedMail
    SOGoPasswordChangeEnabled = YES;

    // Authentication using SQL
    /* SQL backend
    SOGoUserSources = (
        {
            type = sql;
            id = users;
            viewURL = "PH_SOGO_DB_TYPE://PH_SOGO_DB_USER:PH_SOGO_DB_PASSWD@PH_SQL_SERVER_ADDRESS:PH_SQL_SERVER_PORT/PH_SOGO_DB_NAME/PH_SOGO_DB_VIEW_AUTH";
            canAuthenticate = YES;

            // The algorithm used for password encryption when changing
            // passwords without Password Policies enabled.
            // Possible values are: plain, crypt, md5-crypt, ssha, ssha512.
            userPasswordAlgorithm = ssha512;
            prependPasswordScheme = YES;

            // Use `vmail.mailbox` as per-domain address book.
            isAddressBook = YES;
            displayName = "Domain Address Book";
            SOGoEnableDomainBasedUID = YES;
            DomainFieldName = "domain";

            // Listing of this LDAP source is only possible when performing a
            // search (respecting the SOGoSearchMinimumWordLength parameter)
            // or when explicitely typing a single dot.
            // Defaults to YES when unset.
            //
            // WARNING: if you have many accounts in this address book, it may
            //          reach server-side query size limit, or cause
            //          performance issue.
            listRequiresDot = NO;

            ModulesConstraints = {
                Mail = { c_webmail = y; };
                Calendar = { c_calendar = y; };
                ActiveSync = { c_activesync = y; };
            };
        },

        //{
        //    displayName = "Global Address Book";
        //    type = sql;
        //    id = global_address_book;
        //    viewURL = "PH_SOGO_DB_TYPE://PH_SOGO_DB_USER:PH_SOGO_DB_PASSWD@PH_SQL_SERVER_ADDRESS:PH_SQL_SERVER_PORT/PH_SOGO_DB_NAME/PH_SOGO_DB_VIEW_AUTH";
        //    canAuthenticate = NO;
        //    isAddressBook = YES;
        //    listRequiresDot = NO;
        //    SOGoEnableDomainBasedUID = YES;
        //    DomainFieldName = "domain";
        //},

        // Display mailing aliases in address book.
        // You need to create SQL view 'sogo.aliases' first.
        //
        // For MySQL:
        //
        //  CREATE VIEW sogo.aliases (c_uid, c_name, c_password, c_cn, mail, domain)
        //          AS SELECT address, name, '', name, address, domain
        //          FROM vmail.alias WHERE active=1;
        //
        //{
        //    displayName = "Mailing Lists";
        //    type = sql;
        //    id = aliases;
        //    viewURL = "PH_SOGO_DB_TYPE://PH_SOGO_DB_USER:PH_SOGO_DB_PASSWD@PH_SQL_SERVER_ADDRESS:PH_SQL_SERVER_PORT/PH_SOGO_DB_NAME/PH_SOGO_DB_VIEW_ALIASES";
        //    canAuthenticate = NO;
        //    isAddressBook = YES;
        //    listRequiresDot = NO;
        //    SOGoEnableDomainBasedUID = YES;
        //    DomainFieldName = "domain";
        //},
    );
    SQL backend */

    // Authentication using LDAP
    /* LDAP backend
    SOGoUserSources = (
        {
            // Used for user authentication
            type = ldap;
            id = users;
            canAuthenticate = YES;
            isAddressBook = NO;
            displayName = "LDAP Authentication";

            hostname = "PH_LDAP_URI";
            baseDN = "domainName=%d,PH_LDAP_BASEDN";
            bindDN = "PH_LDAP_BINDDN";
            bindPassword = "PH_LDAP_BINDPW";
            filter = "objectClass=mailUser AND accountStatus=active AND enabledService=mail AND enabledService=sogo";
            scope = SUB;

            // always keep binding to the LDAP server using the DN of the
            // currently authenticated user. bindDN and bindPassword are still
            // required to find DN of the user.
            // Note: with default LDAP acl configured by iRedMail, user doesn't
            //       have privilege to query PH_LDAP_BASEDN.
            //       so this doesn't work.
            bindAsCurrentUser = YES;

            // The algorithm used for password encryption when changing
            // passwords without Password Policies enabled.
            // Possible values are: plain, crypt, md5-crypt, ssha, ssha512.
            userPasswordAlgorithm = ssha512;

            CNFieldName = cn;
            IDFieldName = mail;
            // value of UIDFieldName must be unique on entire server
            UIDFieldName = mail;
            IMAPLoginFieldName = mail;
            MailFieldNames = (mail);
            bindFields = (mail);

            ModulesConstraints = {
                Mail = { enabledService = sogowebmail; };
                Calendar = { enabledService = sogocalendar; };
                ActiveSync = { enabledService = sogoactivesync; };
            };
        },
        {
            // Used for global address book
            type = ldap;
            id = global_addressbook;
            canAuthenticate = NO;
            isAddressBook = YES;
            displayName = "Global Address Book";
            bindAsCurrentUser = YES;

            // Listing of this LDAP source is only possible when performing a
            // search (respecting the SOGoSearchMinimumWordLength parameter)
            // or when explicitely typing a single dot.
            // Defaults to YES when unset.
            //
            // WARNING: if you have many accounts in this address book, it may
            //          reach server-side query size limit, or cause
            //          performance issue.
            listRequiresDot = NO;

            hostname = "PH_LDAP_URI";
            baseDN = "domainName=%d,PH_LDAP_BASEDN";
            bindDN = "PH_LDAP_BINDDN";
            bindPassword = "PH_LDAP_BINDPW";
            filter = "((enabledService=mail AND accountStatus=active AND enabledService=displayedInGlobalAddressBook) AND ((objectClass=mailUser AND enabledService=sogo) OR (objectClass=mailList) OR (objectClass=mailAlias)))";
            scope = SUB;

            IDFieldName = mail;
            bindFields = (mail);
            // value of UID field must be unique on whole server.
            UIDFieldName = mail;
            IMAPLoginFieldName = mail;

            CNFieldName = cn;
            SearchFieldNames = (cn, sn, displayName, telephoneNumber, mail, shadowAddress, departmentNumber);

            // Resources management (Free/Busy)
            // Reference: https://docs.iredmail.org/sogo.manage.resources.html
            KindFieldName = "Kind";
            MultipleBookingsFieldName = "MultipleBookings";
        }
    );
    LDAP backend */
}
